Impingers
Absorb reactive gases and mists into a collection liquid.
Gas and vapour sampling media collect airborne gases and vapours for later laboratory analysis. The family spans pumped sorbent tubes, diffusive passive samplers, liquid impingers and whole-air sample bags, plus reagent-coated filters for reactive compounds — from SKC.
Choose your technology
Absorb reactive gases and mists into a collection liquid.
No pump: diffusive badges sampling at a fixed uptake rate.
Hold a whole-air grab sample intact for later lab analysis.
Pumped sampling drawn through a packed sorbent bed; solvent or thermal desorption.
Glass and PFA bubbler bottles drawing air through a liquid; 25 mL midget, fritted or spill-resistant.
25 mL · 170–200 µm frit
SKC
Broadband VOC Chek 575 badge with sampling rates for 300+ compounds; choice of charcoal or Anasorb 747.
350 mg charcoal · 300+ VOCs
SKC
Diffusive sampler for sub-ppb to ppt VOCs and SVOCs; a pump-free thermal-desorption alternative to EPA TO-17.
5 sorbents · sub-ppb to ppt
SKC
Single-use badge for formaldehyde and aldehydes using 2,4-DNPH chemistry; meets OSHA 1007 and ISO 16000-4.
28.6 mL/min · LOD 2 ppb
SKC
Single-use badge for sulphur dioxide and/or nitrogen dioxide; TEA chemistry as in active OSHA ID-182.
SO2 15.2 · NO2 17.3 mL/min
SKC
Single-use ammonia badge with sulphuric-acid tape; chemistry as in OSHA ID-188 and NIOSH 6016, 0.1–100 ppm.
39.92 mL/min · 0.1–100 ppm
SKC
Ethylene oxide badge using the same sorbent as active OSHA 1010; ideal for hospitals and sterile-supply sites.
21.2 mL/min · 0.1–4 ppm
SKC
Miniature HCN badge specified in OSHA Method 1015; soda-lime sorbent loads from a vial in the field.
28.4 mL/min · 0.44–20 ppm
SKC
Reusable-holder badge for elemental mercury vapour (TWA); Anasorb C300 capsule, validated to OSHA ID-140.
Anasorb C300 · up to 120 h
SKC
Colour-change strips giving a 10-minute visual read of ozone from under 45 to over 105 ppb — no pump or lab.
45–105 ppb · 10-min read
SKC
Pump-free diffusive TD tube for outdoor benzene and VOC monitoring; sorbent Carbopack X or Anasorb GCB1.
Carbopack X/GCB1 · EPA 325A
SKC
Classic 51 µm Tedlar film for VOCs, referenced in many EPA methods; rated -72 to 107 °C in 0.5 to 100 L sizes.
51 µm · -72 to 107 °C
SKC
Specially cleaned 4-ply 127 µm foil, low VOC and sulphur background; good stability for low-ppm VOCs.
4-ply · 127 µm · 48-h H2S
SKC
Bags with a low-resistance mouthpiece fitting for human-breath VOC and VSC sampling; Tedlar or FlexFoil PLUS.
1 L · Tedlar/FlexFoil PLUS
SKC
Rigid box that fills a sample bag by vacuum so the sample never passes through the pump; for 1 to 25 L bags.
SKC
Made-to-order bags in any material — Tedlar, FlexFilm or FlexFoil — with your choice of size and fitting.
SKC
Economical 4-ply 127 µm foil for VOCs, CO, CO2, methane and SF6; low sulphur background, 48-h H2S stability.
4-ply · 127 µm · low sulphur
SKC
Polar sorbent for methanol, amines, acids and mercaptans; treated grades collect aldehydes and ammonia.
Silica gel · 6–10 mm OD
SKC
SKC proprietary sorbents: 747 carbon for polar organics and ketones, plus CSC charcoal and GCB grades.
Anasorb 747 / CSC / GCB
SKC
Coconut-shell charcoal, high surface area for a broad range of non-polar organic vapours.
Coconut charcoal · 6–10 mm OD
SKC
Porous-polymer sorbent for mid-to-high-boiling compounds; low background, hydrophobic, for thermal desorption.
Tenax TA & GR · EPA TO-17
SKC
Hydrophobic porous-polymer resin XAD-2/4/7 for soluble organics and pesticides; many coated variants.
XAD-2, XAD-4, XAD-7
SKC
Porous polymer for low-boiling hydrocarbons and benzene; grade 102 traps chlorinated pesticides.
Chromosorb 102 / 106
SKC
Foam plugs for semi-volatiles: low-volume tubes to 24 h or high-volume tubes for ambient PCBs and PAHs.
22×100 or 65×125 mm
SKC
Porous polymers of graded polarity (P, Q, T, N); the N grade is used to monitor volatile nitriles.
Porapak P, Q, T, N
SKC
Combined filter and two-bed sorbent tube collecting aerosols and vapours — pesticides, explosives, glycols.
Filter + 2 sorbent beds
SKC
Single- and multi-bed tubes for sub-ppb VOCs in ambient air; purged or unpurged, EPA and MDHS methods.
¼ × 3½ in · EPA/MDHS
SKC
Diffusive stainless steel TD tubes for 14-day fenceline benzene monitoring; meet EPA 325A and MDHS 104.
89 × 6.35 mm · EPA 325A
SKC
Niche sorbents in one range: carbon beads, Florisil, molecular sieve, firebrick, soda lime and VOST traps.
SKC
Made-to-order solvent- and thermal-desorption tubes built to your sorbent, size and packing specification.
SKC
Sampling-train hardware: low-flow adaptors and CPCs, tube holders and covers, tube breakers and field tools.
SKC
Reagent-coated filters preloaded in cassettes to trap aldehydes, amines and acids without impinger liquids.
37 mm cassette · packs of 10
SKCSorbent tubes are the standard route for organic vapour sampling, including charcoal tube sampling. A pump draws air through a packed sorbent bed, and the trapped vapours are recovered by solvent or thermal desorption for GC or HPLC. Sorbents span charcoal, silica gel, Anasorb, Tenax and XAD, and the tubes meet OSHA, NIOSH, EPA TO-17 and MDHS methods. Choose the sorbent for your analyte and the desorption format for your laboratory.
Yes. Passive samplers collect by diffusion at a validated uptake rate, 15 to 40 mL/min, and are validated to ASTM D6246 and ANSI/ISEA 104. Sampling runs from 15 minutes to 7 days. Besides broadband organic-vapour badges, there are compound-specific samplers for formaldehyde, SO2/NO2, ammonia and ozone, among others.
For reactive gases and mists, impingers draw air through a collection liquid for wet-chemistry analysis. To keep a whole-air grab sample intact, use sample bags, in sizes from 0.5 to 100 litres. For aldehydes, amines and acids without impinger liquids, the coated (treated) filters come preloaded in cassettes with a reagent coating.
Our application engineers aim to reply within 3 business hours.