Passive Samplers

Passive air samplers: diffusive badges and tubes that collect gases and vapours without a pump, at a validated uptake rate, then go to the lab for analysis. The range covers broadband organic-vapour badges and compound-specific samplers for formaldehyde, SO2/NO2, ammonia, ethylene oxide, HCN, mercury and ozone — from SKC.

All models

10 models

What is a passive air sampler?

A passive air sampler collects gases and vapours by diffusion, with no pump. The badges and tubes sample at a validated uptake rate, 15 to 40 mL/min across the range, for anything from 15 minutes to 7 days, and then go to the lab; the ozone test strips are the exception and are read on site. The organic-vapour badges follow ASTM D6246 and ANSI/ISEA 104, and the ethylene oxide badge ANSI/ISEA 104.

Broadband or compound-specific diffusive sampler?

For mixed vapours, the organic vapour passive samplers are broadband: the VOC Chek 575 badge has sampling rates for 300+ compounds, with charcoal or Anasorb 747. For trace levels, ULTRA passive samplers cover sub-ppb to ppt VOCs and SVOCs as a pump-free thermal-desorption alternative to EPA TO-17, and passive thermal desorption tubes suit outdoor benzene and VOC monitoring.

Which diffusion badge for formaldehyde, ammonia or other gases?

UMEX100 samples formaldehyde and aldehydes and meets OSHA 1007 and ISO 16000-4. UMEx 200 covers SO2 and NO2, and UMEx 300 covers ammonia at 0.1–100 ppm. The ethylene oxide badge reads 0.1–4 ppm, and the hydrogen cyanide badge 0.44–20 ppm. The elemental mercury badge samples for up to 120 h. Ozone test strips give a 10-minute visual read from 45–105 ppb, with no pump or lab.

Questions about these products?

Our application engineers aim to reply within 3 business hours.

Ask an engineer