Air Sampling Consumables
0 models
Diese Seite gibt es auch auf Deutsch.
Cette page existe aussi en français.
Metering valves for regulating the flow of gases and liquids, from manual needle valves to electrically actuated control valves. Brass or stainless barstock valves, PTFE-bodied valves for corrosive or high-purity fluids, and proportional solenoid and stepping-motor valves — from Aalborg Instruments.
Utility metering valves in three orifice sizes, straight or 90° flow, to 60 SLPM air; brass or stainless.
CV to 0.30 · 34 bar
ANALYT-MTC
Sixteen-turn non-rising stem for hysteresis-free fine metering; six orifice sizes, brass or stainless.
16 turns · 34 bar
ANALYT-MTC
PTFE-wetted needle valve for corrosive or high-purity fluids; metal shell, single o-ring, to 5.2 bar.
PTFE-wetted · 5.2 bar · 65 °C
ANALYT-MTC
6 mm orifice for higher flow, to 300 SLPM air; PTFE-wetted, six components with a single o-ring.
6 mm orifice · 300 SLPM air
ANALYT-MTC
Eight-turn non-rising stem and safety handle for fine metering of corrosive fluids; PTFE-wetted.
8 turns · PTFE · 5.2 bar
ANALYT-MTC
Proportional solenoid valve, normally closed, sets flow by coil voltage; five sizes to 100 SLPM air.
0–30 VDC · to 69 bar
ANALYT-MTC
Stepping-motor drive holds position when de-energized; fine 0.0005″/step resolution, to 1000 L/min air.
0.0005″/step · 1000 L/min
ANALYT-MTC
Digital successor of the SMV: analog, RS-485, direction/speed or step clock control; 0.000125″/step, to 1000 sL/min air.
RS-485 · 1000 sL/min
ANALYT-MTCStart with the wetted material and the pressure. The VB barstock valves are utility metering valves in three orifice sizes, straight or 90° flow, to 60 SLPM air; brass or stainless. For corrosive or high-purity fluids, choose PTFE-wetted valves, which are limited to 5.2 bar, 65 °C: the VT PTFE needle valves have a metal shell and a single o-ring. When you need more flow, the VT6 PTFE needle valve has a 6 mm orifice and takes up to 300 SLPM air.
A precision needle valve spreads the stroke over more stem turns, so you can set small flows repeatably. The VB precision barstock valves use a sixteen-turn non-rising stem for hysteresis-free fine metering, with six orifice sizes. For corrosive fluids, the VT PTFE precision needle valves offer an eight-turn non-rising stem and a safety handle.
Manual valves are set by hand. If a controller has to set the flow, use an electrically actuated valve. The PSV proportional solenoid valve is normally closed and sets flow by coil voltage; it comes in five sizes to 100 SLPM air. The SMV stepping motor valve holds its position when de-energized and resolves 0.0005″/step, to 1000 L/min air.
Our application engineers aim to reply within 3 business hours.