SMVI intelligent control valve
Aalborg SMVI intelligent control valve: stepping motor metering valve for gases or liquids, with four control modes and an isolated RS-485 interface.
The Aalborg SMVI intelligent control valve is a two-way metering needle valve for gases or liquids. A high-precision linear stepping motor drives the valve spindle; the needle moves 0.000125″/step, or 0.0000078125″/step in micro-stepping mode. When de-energized, the valve stays in its last position.
What changed against the SMV valve?
The SMVI keeps the valve of the SMV stepping motor valve and adds digital electronics: four control modes in one valve, a galvanically isolated RS-485 interface with an ASCII command set, a push-button that shows and selects the control mode and the analog input on site, and CLOSE and PURGE override inputs with a green and a red light on top of the valve. Power input is universal 12 to 24 Vdc. The SMV remains available for direction/speed control.
Which control modes does the SMVI support?
- Analog interface: the valve opening is linearly proportional to a 0-5 Vdc, 1-5 Vdc, 4-20 mA or 0-10 Vdc control signal. The 0-10 Vdc option needs a jumper on the PCB and must be specified with the order.
- Digital RS-485 interface: a PLC or PC sends the valve opening in % of full opening, 0.00 to 100.00% with 0.01% resolution, and has access to all configuration and process parameters.
- Direction / speed: the legacy mode of the SMV stepping motor valve, with a TTL (low active) direction signal and an analog speed signal.
- Step clock / direction: each falling edge on the step clock input moves the needle one microstep, closing or opening according to the direction input.
The CLOSE and PURGE signals override the valve control: connecting the CLOSE input to ground closes the valve (green light), connecting the PURGE input to ground opens it fully (red light).
Which SMVI size for which flow?
At 20 psi differential pressure and 70 °F, the SMVI20 passes 200 sL/min air or 5.6 L/min water with 3/8″ compression fittings, the SMVI30 500 sL/min air or 14.2 L/min water with 1/2″ compression fittings, and the SMVI40 1000 sL/min air or 28 L/min water with 3/4″ FNPT or 3/4″ compression fittings. Each size comes in aluminum or 316 stainless steel. The SMV stepping motor valve comes in the same three sizes. Browse all valves.
21 entries
| Parameter | Value |
|---|---|
| Materials | Aluminum models : Aluminum housings and valve blocks, PFA closing pins. Stainless steel models : 316 stainless steel valve blocks, PTFE-lined aluminum housing blocks and PFA closing pins. |
| Seals | FKM; Buna®, EPR or FFKM optional |
| Maximum flow rates | 1000 sL/min (air), 28 L/min (H2O), at 20 psi differential pressure, 70 °F |
| Connections | 3/8″, 1/2″ and 3/4″ compression, 3/4″ FNPT |
| Control modes | Analog interface, digital RS-485 interface, direction / speed (legacy SMV mode), step clock / direction |
| Analog control signals | 0-5 Vdc, 1-5 Vdc, 0-10 Vdc (100K input impedance); 4-20 mA (250 Ω input impedance). 0-10 Vdc must be specified with the order. |
| Digital interface | Galvanically isolated RS-485 transceiver, two wires, half duplex; ASCII command set; 9600 baud default |
| Direction and step clock inputs | Digital 5 V TTL (10K input impedance), do not apply more than 5.5 Vdc. Direction CLOSE < 0.8 Vdc, OPEN > 2 Vdc; step clock active low, one microstep at each falling edge. |
| CLOSE / OPEN (PURGE) override inputs | TTL active low (< 0.8 Vdc), do not apply more than 5.5 Vdc. Green light on top of the valve for CLOSED, red light for fully OPEN. |
| Resolution | 0.000125″/step; 0.0000078125″/step in micro-stepping mode |
| Electrical connections | 9-pin “D”-connector, located at the side of the valve; RS-485 on a 3-pin audio connector |
| Power input | Universal 12 to 24 Vdc @ 800 mA (maximum current), protected by a 900 mA resettable fuse |
| Response time | 100 ms time constant |
| Pressure drop at 100% full-scale flow | SMVI20 @ 200 sL/min: 5 PSID (350 mbar) SMVI30 @ 500 sL/min: 7 PSID (490 mbar) SMVI40 @ 1000 sL/min: 10 PSID (700 mbar) |
| Maximum operating pressure | 500 PSIG (35 bar g) |
| Maximum differential pressure | 50 PSID (3.45 bar) |
| Gas and ambient temperature | 32–122 °F (0–50 °C) |
| Ingress protection | IP40 |
| External leak integrity | 1 x 10⁻⁷ sccs He maximum to the outside environment |
| Internal leak in closed position | Up to 0.5% of full-scale range @ 30 PSID |
| Materials in contact with the fluid | Aluminum models (-A) : Anodized aluminum, brass and 316 stainless steel, FKM O-rings. Stainless steel models (-S) : 316 stainless steel, FKM O-rings. Optional O-rings: Buna-N®, EPR or FFKM. |
No rows match your search.
| Model | Maximum Flow Rate AIR (sL/min) | Maximum Flow Rate H2O (L/min) | CV | Connections | Material | |
|---|---|---|---|---|---|---|
| SMVI20 | 200 | 5.6 | 0.336 | 3/8″ compression | Aluminum or stainless steel | |
| SMVI30 | 500 | 14.2 | 0.855 | 1/2″ compression | Aluminum or stainless steel | |
| SMVI40 | 1000 | 28 | 1.735 | 3/4″ FNPT or 3/4″ compression | Aluminum or stainless steel |
Questions about this product?
Our application engineers aim to reply within 3 business hours.