Surface & Skin Sampling

Surface wipe sampling and skin sampling assess contamination settled on surfaces and skin, rather than airborne, using wipes, swabs, tapes and colorimetric test kits. The range covers metals wipes for lead and beryllium, asbestos microvacuum cassettes, colorimetric indicators for amines and isocyanates, spot tests for lead and methamphetamine, plus decontamination solutions and a skin cleanser — from SKC.

All models

17 models
  • Microvacuum Cassettes

    Nozzle cassettes vacuuming settled asbestos or fungal spores from carpet and irregular surfaces at 10 L/min.

    0.45 µm MCE · ASTM D5755

    SKC
    Details →
  • Stick-to-it Lift Tape

    Flexible adhesive slide that lifts mould and dust from surfaces; unbreakable and serialised for the lab.

    SKC
    Details →
  • Ghost Wipes

    Robust water-moistened wipes for lead and surface metals that fully dissolve in acid digestion for recovery.

    ASTM E1792 · NIOSH 9102

    SKC
    Details →
  • Wipe Sample Test Kit

    All-in-one OSHA wipe-method kit for metals, pesticides, amines and corrosives — solvents not included.

    SKC
    Details →
  • Sterile Surface Swab Kit

    Sterile rayon swabs in transport tubes for microbial contamination on grills and other irregular surfaces.

    SKC
    Details →
  • Colorimetric SWYPEs

    Colour-change indicators for amines, isocyanates, phenols and nickel on surfaces or skin — instant read.

    SKC
    Details →
  • PERMEA-TEC Pads

    Pads worn inside gloves that colour-change at breakthrough; sensitive to 3–5 µg for amines and isocyanates.

    3–5 µg · amines/isocyanates

    SKC
    Details →
  • Full Disclosure Kit

    Rhodizonate spot test for lead on skin and surfaces; instant pink bloom, meets NIOSH 9105.

    18 µg lead · NIOSH 9105

    SKC
    Details →
  • LeadSense Swab Kit

    Potassium rhodizonate swabs for lead on surfaces; pink or red at 1 µg or more, 10 tests per kit.

    ≥ 1 µg lead · 10 swabs

    SKC
    Details →
  • Smear Tabs

    Low-ash, acid-hardened paper tabs for wipe sampling of settled metals; OSHA ID-121/125G/206.

    SKC
    Details →
  • Templates

    Manila paper area templates in 10 × 10 cm and 30.5 × 30.5 cm; larger size meets HUD lead guidelines.

    10×10 cm · 30.5×30.5 cm

    SKC
    Details →
  • Surface/Dermal Test Kits

    Bundled SWYPEs, PERMEA-TEC pads and decontamination solutions for one target compound group; OSHA validated.

    SKC
    Details →
  • Spill Decontamination Kits

    Biodegradable clean-up kits for aromatic amine and isocyanate spills; 15 L of solution plus confirming SWYPEs.

    15 L solution · SWYPE 3–5 µg

    SKC
    Details →
  • DECONtamination Solutions

    Biodegradable solutions that decontaminate surfaces of aromatic amines and isocyanates; 3.75 L or 650 ml.

    SKC
    Details →
  • D-TAM Skin Cleanser

    Skin cleanser that lifts water-insoluble amines, pesticides and resins without abrading the skin barrier.

    SKC
    Details →
  • MethAlert

    Colorimetric wet-wipe-spray test for methamphetamine hot spots; qualitative, no training needed.

    15–5000 µg/100 cm² · 12 tests

    SKC
    Details →
  • MethChek

    Immunoassay wipe kit for semi-quantitative methamphetamine down to 50 ng; four sensitivity levels.

    from 50 ng (0.05 µg/100 cm²)

    SKC
    Details →

Which wipe do I need for surface wipe sampling of metals?

For lead and other metals, Ghost Wipes are water-moistened and dissolve fully in acid digestion; they meet ASTM E1792, NIOSH 9102, OSHA ID-125G. Smear Tabs are low-ash paper tabs for the same job, and Templates define the wiped area in 10 × 10 cm and 30.5 × 30.5 cm. The Wipe Sample Test Kit bundles an OSHA wipe method for metals, pesticides, amines and corrosives.

How do I sample microbes, mould or asbestos on a surface?

Microvacuum Cassettes vacuum settled asbestos or fungal spores at 10 L/min. The Sterile Surface Swab Kit covers microbial contamination on irregular surfaces, and Stick-to-it Lift Tape lifts mould and dust.

What is the quickest lead wipe test on skin or surfaces?

The Full Disclosure Kit is a rhodizonate spot test for skin and surfaces that meets NIOSH 9105. The LeadSense Swab Kit is a swab test for surfaces that turns pink or red from 1 µg of lead.

How do I check surfaces and skin for amines, isocyanates and methamphetamine?

Colorimetric SWYPEs change colour on contact with amines, isocyanates, phenols and nickel. PERMEA-TEC Pads worn inside gloves show breakthrough, and Surface/Dermal Test Kits bundle them for one compound group. For clean-up, see DECONtamination Solutions, Spill Decontamination Kits and D-TAM Skin Cleanser. MethAlert is qualitative; MethChek is semi-quantitative.

Questions about these products?

Our application engineers aim to reply within 3 business hours.

Ask an engineer