Gas And Vapour Sampling
1 model
A bioaerosol sampler collects viable, culturable airborne micro-organisms — bacteria, fungi and viruses — for laboratory analysis. The range covers liquid impingers that collect into water or mineral oil and single-stage cascade impactors that deposit organisms onto agar plates, driven by a high-volume sonic-flow pump — from SKC.
Mains bioaerosol pump to 62 L/min for BioSampler liquid impingement; two mounts run two samplers.
to 62 L/min · mains · 7.25 kg
SKC
Glass swirling-liquid impinger collecting into water or ViaTrap oil; autoclavable and reusable for up to 8 h.
12.5 L/min · glass · to 8 h
SKC
Single-stage cascade impactor depositing organisms onto agar plates at 28.3 L/min; meets NIOSH 0800/0801.
28.3 L/min · D50 0.6 µm
SKCChoose by what the laboratory does with the sample. The BioSampler is a glass swirling-liquid impinger that collects into water or ViaTrap oil at 12.5 L/min sonic flow, for up to 8 h. The glass body is autoclavable and reusable. The BioStage is a single-stage cascade impactor that deposits organisms directly onto agar plates at 28.3 L/min, with a D50 cut-point of 0.6 µm, and it meets NIOSH 0800/0801.
In short: pick the impinger when you want the organisms in a liquid, and the impactor when you want colonies on agar.
The BioSampler works at sonic flow, which needs a high-volume pump. The BioLite+ Pump is a mains bioaerosol pump to 62 L/min for BioSampler liquid impingement; its two mounts run two samplers at once. For a wider view of pumps in this flow range, see the high flow air sampling pumps.
These samplers target viable, culturable bacteria, fungi and viruses. For airborne dust or fibres, use particulate sampling instead; for settled contamination, see surface and skin sampling.
Our application engineers aim to reply within 3 business hours.