SKC

UMEx 300 Passive Sampler Ammonia

UMEx 300 passive sampler, suitable for monitoring ammonia, one of the most commonly produced industrial chemicals, with chemistry similar to active OSHA Method ID-188 and NIOSH 6016

Ask an engineer

The UMEx 300 passive sampler accurately and reliably samples workplace exposure to ammonia. Constructed of tough polypropylene, the single-use UMEx 300 contains a sulphuric acid treated tape for reliable collection of ammonia, with chemistry similar to active methods OSHA ID-188 and NIOSH 6016. It is used for personal or area sampling and is part of the Passive Samplers range.

  • Accurate and reliable
  • Highly sensitive and specific analysis method
  • Economical, low cost, single use sampler
  • Easy to use: no pump or training required
  • Sample medium and blank correction in one sampler
  • No particulate interference
  • Small and unobtrusive, with a simple-to-use “on/off” sliding cover
  • No glass or chemical liquids in the sampler

How does the UMEx 300 passive sampler collect ammonia?

Samplers are provided in individual aluminiumised pouches that can be used to transport the sampler to a laboratory after sampling. For convenience and quality control assurance against contamination, each sampler incorporates a “blank correction” section in addition to the active sampling section, so there is no need to send extra samplers to the laboratory. Analysis is by ion chromatography (IC) with conductivity detection for the ammonium ion. The shelf-life date is printed on a label on the outside of each pouch for easy inventory management, and a clip attaches the sampler to a worker’s collar for personal sampling or to an appropriate location for area sampling.

Which concentration range does the UMEx 300 cover?

The validated concentration range is 0.1 to 100 ppm. The sampling rate is 39.92 ml/min with a RSD of 11.4%, and the lower detection limit is 2.4 ppm for 15 minutes, 0.075 ppm for 8 hrs and 0.025 ppm for 24 hrs. The sampler has a limited shelf-life of 9 months from date of manufacture at <4°C and is designed for single use only. A pack holds 10 samplers (500-300).

Which industries expose workers to ammonia?

Ammonia is one of the most commonly produced industrial chemicals. Workers can be exposed to ammonia in the following industries:

  • Agricultural (fertilisers)
  • Janitorial services (cleaners)
  • Food and beverage (refrigeration and fermentation)
  • Remediation (removal of contaminants)
  • Fuel
  • Manufacturing of plastics, explosives, pesticides, textiles and dyes

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer