SKC

Coated (Treated) Filters

SKC coated (treated) filters are reagent-coated filters preloaded in cassettes, ready to use, meeting agency method specifications and trapping aldehydes, amines and acids without impinger liquids.

Ask an engineer

SKC offers coated filters to meet a variety of OSHA, NIOSH, ASTM, and international agency methods. SKC coated (treated) filters are ready to use and need no assembly: they come preloaded into cassettes with end plugs and shrink bands.

What are coated (treated) filters used for?

Some chemicals are not effectively trapped by any solid sorbent without special preparation. Chemical coating is carried out on various sorbents to trap aldehydes, nitrogen dioxide, amines and many more compounds. Coated filters make sampling reactive compounds fast and easy, and they are a convenient alternative to wet chemistry methods using impingers. Use them to collect compounds that exist as an aerosol or mist or for some higher boiling vapours.

  • Ready to use and time-saving
  • Convenient alternative to impinger wet chemistry methods, with no cumbersome collection liquids or glass
  • Economical
  • No assembly required, with end plugs and shrink bands
  • Meet agency method specifications
  • Easy personal sampling
  • Small package size for short shelf-life product

How do you use a coated filter cassette?

  1. Unplug the lightweight cassette.
  2. Insert it into an SKC filter cassette holder, such as those under Cassette and Filter Holders.
  3. Clip the holder to a worker’s collar.
  4. Attach it to a personal sampling pump.

Flow rates are typically greater than 1 L/min and sampling times range from 15 minutes to one hour. Most coated filter samples are extracted in solvents and analysed by gas or liquid chromatography.

Which coated filter for hydrogen peroxide or isocyanates?

The part number table lists each chemical with its method. Two examples:

  • 225-9030 for hydrogen peroxide, listed for OSHA 1019 and NON 57: two 25 mm quartz filters coated with titanium oxysulphate hydrate in a 25 mm cassette, packs of 10. It also requires sorbent tube 226-193-UC or 226-199-UC for simultaneous, separate sampling of peracetic acid.
  • 225-9002 for isocyanates (HDI;2,6-TDI;2,4-TDI) under OSHA 42: one glass fibre filter and cellulose support coated with 1-(2-pyridyl) piperazine. It meets the specifications of OSHA Methods 42 and 47 but contains a higher than specified loading of reagent to increase stability and shelf-life, and traps both vapour and aerosol phases. Storage below 4°C required.

Some isocyanate filters meet multiple ASTM methods; the table refers to ISO-CHEK Cassettes for these.

The methods listed are the most widely used. Coated filters have a limited shelf life and are supplied in 37 mm cassettes unless otherwise noted. The range is part of Gas And Vapour Sampling.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer