SKC

Cassette and Filter Holders

SKC reusable filter cassette holders, in-line and open-face, from 13 to 47 mm in polypropylene, Delrin, polycarbonate or PFA; part 225-32 is specified in NIOSH Method 5503 for PCBs.

Ask an engineer

SKC lightweight filter cassette holders provide for secure filter sampling and are available in 13, 25, 37, and 47-mm sizes and a variety of materials and styles. This page covers reusable holders; empty cassette housings are listed as SureSeal cassette blanks, and the pads that sit under the filter as filter supports. All of them belong to the filter and cassette accessories.

Which filter cassette holder for which filter size?

  • 13 mm: 225-32 (pack of 10) and 225-3201 (pack of 100). Two-section polypropylene Swinnex or Face Level Sampling Headset, reusable and autoclavable, specified in NIOSH Method 5503 for PCBs. Replacement 13 mm diameter silicone gaskets are available.
  • 25 mm: 225-1109, a two-section in-line Delrin holder with stainless steel support screen, useful for low pressure applications, and 225-1107, an open face Delrin holder with a ¼ inch ID hose barb adaptor.
  • 47 mm: 225-4702, a polycarbonate in-line holder that opens and closes easily without disturbing the filter and is autoclavable; 225-1712 in Savillex PFA; and 225-1147 in polypropylene.

What does the SKC 225-1 filter cassette holder take?

The 225-1 holds 2 and 3 part cassettes of 25 and 37 mm and attaches to a worker’s collar. It includes 0.9 m of ¼ inch Tygon tubing, a collar clip and a 25 mm adaptor ring. It accommodates a two or three-piece 37 mm cassette with or without a cyclone, a 25 mm cassette with cowl, and a DPM Cassette with a GS-1 Cyclone. Clips and tubing for other cassettes are in filter sampling accessories.

Which holder for vacuum, pressure or high temperature?

For 47 mm, the polypropylene 225-1147 suits vacuum and pressure air sampling and can be used with pressures up to 6.9 bar. The PFA 225-1712 has ¼ inch ferrule nuts and a wrench set, lets you replace filters without disconnecting lines and operates at -200 to +260°C. For the best seal, SKC recommends PTFE filters, as other filter materials may leak.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer