Filter And Cassettes Accessories
7 models
A real-time dust monitor reports dust concentration directly by light scattering, with no gravimetric weighing step. The range runs from personal breathing-zone units to fixed-point and multi-sensor perimeter stations, most with interchangeable respirable, thoracic, inhalable or PM10/PM2.5 heads — from SKC.
Personal real-time monitor with interchangeable heads and an in-line 37 mm cassette for gravimetric back-up.
0.01–200 mg/m³ · 0.1–100 µm
SKC
Combines a gravimetric sampling pump and optical sensor with a colour touch screen; runs over 22 hours.
0.001–500 mg/m³ · 22 h
SKC
Passive dust monitor that becomes an active gravimetric sampler when paired with a 2 L/min pump.
0.01–200 mg/m³ · 2 L/min
SKC
Simple handheld survey tool giving instantaneous respirable dust readings on two selectable ranges.
0.01–200 mg/m³ · 0.1–50 µm
SKC
Weatherproof ambient monitor with interchangeable PM10, PM2.5, PM1.0 and TSP heads; runs up to 24 hours.
0.001–20 mg/m³ · 4 L/min
SKC
Fixed-point monitor with interchangeable PM1, PM2.5, respirable and PM10 impactors at 2 L/min.
0.001–20 mg/m³ · 2 L/min
SKC
Multi-sensor perimeter station measuring PM10 and PM2.5 plus up to 14 air parameters simultaneously.
Up to 14 sensors · 1–3 L/min
SKCFor breathing-zone work, the HAZ-DUST IV is a personal real-time monitor with interchangeable heads and an in-line 37 mm cassette for gravimetric back-up. The HAZ-DUST I is a simple handheld survey tool giving instantaneous respirable dust readings on two selectable ranges.
The HAZ-DUST 7204 combines a gravimetric sampling pump with an optical sensor and a colour touch screen, and runs over 22 hours. The Split2 is a passive dust monitor that becomes an active gravimetric sampler when paired with a 2 L/min pump.
The EPAM 5000 is a weatherproof ambient monitor with interchangeable PM10, PM2.5, PM1.0 and TSP heads and runs up to 24 hours. The AIR-AIDE is a fixed-point monitor with interchangeable PM1, PM2.5, respirable and PM10 impactors at 2 L/min. For a site perimeter, the HAZ-SCANNER EPAS station measures PM10 and PM2.5 plus up to 14 air parameters simultaneously.
A monitor gives the concentration instantly; weighing a filter gives the mass in the lab. Models with a cassette or sampling pump give both, so the optical reading can be checked against a filter.
Our application engineers aim to reply within 3 business hours.