Particle Size-Selective Sampling

Respirable dust cyclones, impactors and cowled inlets fractionate aerosol by aerodynamic diameter onto a collection filter for gravimetric or chemical analysis. They span respirable (4 µm cut), thoracic, inhalable (100 µm) and PM10/PM2.5/PM1.0 fractions, plus fibre and diesel-particulate heads — from SKC.

IOM Sampler, in use

All models

15 models

Which respirable dust cyclone do I need?

The four respirable cyclones all give a 4 µm cut and differ in flow and build. The GS-1 cyclone is a single-inlet, Dorr-Oliver-equivalent design at 2 L/min. The GS-3 cyclone is multi-inlet and unaffected by wind, at 2.75 L/min. The plastic cyclone is conductive plastic at 3.0 L/min with a grit pot, and the aluminium cyclone runs at 2.5 L/min for NIOSH 7500 silica.

For diesel exposure, the DPM cyclone separates diesel elemental carbon from coal and respirable dust for NIOSH 5040 analysis.

Which sampler collects the inhalable or thoracic fraction?

The IOM sampler traps the inhalable fraction to 100 µm in a reusable weighable cassette. The Button sampler uses a porous curved-surface inlet with low wind sensitivity for inhalable dust and bioaerosols. The IFV Pro sampler collects inhalable aerosol and vapour together at 1 L/min. Parallel particle impactors match the respirable or thoracic convention in 2, 4 or 8 L/min models.

For fibres and welding fume, see the cowled asbestos sampling head and face level sampling headset (ISO 10882-1).

Which impactor gives PM10 or PM2.5?

The IMPACT sampler takes ambient PM2.5, PM10 or PM Coarse at 10 L/min onto a 47 mm filter. The Personal Environmental Monitor samples PM2.5 or PM10 indoor air, and the Personal Modular Impactor is a single-stage unit at 3 L/min. For several fractions at once, the Sioutas cascade impactor collects five size fractions at 9 L/min.

Questions about these products?

Our application engineers aim to reply within 3 business hours.

Ask an engineer