EPAM 5000 Particulate Monitor
EPAM 5000 particulate monitor: a highly sensitive, portable direct reading monitor for ambient and environmental particulate monitoring, with 10, 2.5 or 1.0 µm sampling heads.
The EPAM 5000 is a highly sensitive and accurate portable particulate monitor for ambient and environmental monitoring. Interchangeable size-selective sampling heads for PM10, PM2.5, PM1.0 and TSP let you target specific particle fractions. It is easy to set up and use. It is part of our particulate monitors.
How does the EPAM 5000 direct reading particulate monitor work?
An integral sample pump draws air at 4 L/min through the selected head. The clear display gives instantaneous readings: concentration, TWA, STEL, Minimum and Maximum, over a sensing range of 0.001 to 20 mg/m3. Direct reading and gravimetric sampling measurements run simultaneously, and a 47 mm filter holder is available for the gravimetric part. The memory holds 21,600 data points, with RS-232 digital output. DustComm Pro Software handles data downloading, trend analysis and reporting of concentration changes over time.
How long does the EPAM 5000 run on one battery charge?
The weatherproof case is built for ambient monitoring. One battery charge gives up to 24 hours of operation, and the monitor runs continuously on the AC adaptor or the optional solar panel.
Which PM10, PM2.5 or PM1.0 kit should I order?
The kit comes with the impactor of your choice, plus battery, AC charger 110-240 V, DustComm Pro Software on USB Memory Stick, RS-232 computer cable, manual and weather tight carry case:
- 770-203: kit with PM10 impactor
- 770-202: kit with PM2.5 impactor
- 770-201: kit with PM1.0 impactor
For a fixed-point area monitor, see the AIR-AIDE.
17 entries
| Parameter | Value |
|---|---|
| Accuracy | ±10% to filter gravimetric SAE fine test dust |
| Sensing Range | 0.001 to 20 mg/m3 |
| Display Resolution | 0.01 mg/m3 |
| Particle Size Range | 0.1 to 100 µm |
| Measurement Precision | ±0.03 mg/m3 (3 µm/m3) |
| Calibration | NIOSH Method 0600 gravimetric reference – NIST traceable SAE fine test dust |
| Displayed Particle Concentration | Instantaneous, TWA, STEL, Minimum, Maximum |
| Sample Flow Rate | 4 L/min |
| Power | Rechargeable Lead-acid battery or AC Adaptor |
| Operating Time | ≥24 hours |
| Charging Time | Approx 22 hours |
| Alarm Output | 90 dB at 3ft |
| Digital Output | RS-232 |
| Data Storage | 21,600 data points |
| Temperature | Operating: -10 to +50°C Storage: -20 to +70°C |
| Dimensions | 15.2 x 35.6 x 25.4 cm |
| Weight | 4500 g |
No rows match your search.
| Description | Part Number | |
|---|---|---|
| EPAM 5000 Kit, includes: Monitor, choice of size-selective impactor, battery, AC Charger 110-240 V. DustComm Pro Software on USB Memory Stick. RS-232 computer cable, manual, weather tight carry case. -Kit with PM10 impactor | 770-203 | |
| EPAM 5000 Kit, includes: Monitor, choice of size-selective impactor, battery, AC Charger 110-240 V. DustComm Pro Software on USB Memory Stick. RS-232 computer cable, manual, weather tight carry case. -Kit with PM2.5 impactor | 770-202 | |
| EPAM 5000 Kit, includes: Monitor, choice of size-selective impactor, battery, AC Charger 110-240 V. DustComm Pro Software on USB Memory Stick. RS-232 computer cable, manual, weather tight carry case. -Kit with PM1.0 impactor | 770-201 |
22 entries
| Description | Part Number | ||
|---|---|---|---|
| Impactor PM1.0, interchangeable | 770-204 | | |
| Impactor PM2.5, interchangeable | 770-205 | | |
| Impactor PM10.0, interchangeable | 770-206 | | |
| Impactor Grease | 770-211 | | |
| Impactor Sleeve, holds impactor for insertion into the sampling inlet | 770-212 | | |
| Calibration Standard, for verifying span and optical sensor performance | 770-207 | | |
| Filter Holder, 47 mm for gravimetric sampling (requires filters, sold separately) | 770-215 | | |
| PTFE Gravimetric Filter with PTFE support, 47 mm 2.0 µm pore size, pack 150 | 225-3748 | | |
| Quartz (Tissuquartz) Gravimetric Filter, 47 mm, 432 µm thick, pack 25 | 225-1823 | | |
| Zeroing Accessory | 770-214 | | |
| Tripod, adjustable stand (1 to 2 m) and mounting plate for unattended monitoring | 770-217 | | |
| Solar Power Panel, provides continuous power where AC mains is not available or accessible | 770-230 | | |
| Precipitation Cap, prevents rain and mist directly entering the sensor | 770-216 | | |
| Radio Modem, 900 MHz with up to 450 m line-of-sight transmission | 770-505X | | |
| Weatherproof Enclosure for Radio Modem | 770-505WE | ||
| Remote Sampling Probe, stainless steel with 1.8 m of Tygon tubing, for hard to reach areas | 770-226 | ||
| Internal Zeroing Filter and Tubing | 770-218 | | |
| Cleaning Kit, includes bulb, swabs and lens tissue (no air canister) | 770-305B | ||
| AC Charger 110-240 V , can be used to operate EPAM 5000 continuously | 770-219 | ||
| Replacement Lead-Acid Battery Pack | 770-229 | | |
| Wireless Network Software for Windows and Apple Computers | 770-507 | ||
| DustComm Pro Software on USB Flash Drive | 770-225 |
No rows match your search.
Questions about this product?
Our application engineers aim to reply within 3 business hours.