Hazard search

Copper and compounds (dusts and mists)

CAS number
No CAS number
Also known as
Copper acetates · Copper cyanide · Copper naphthenate · Copper oxychloride · Copper Sulphate · Cu, (Anhydrous and Monohydrated) · Cupric chloride · Cupric nitrate · Cupric oxide (black copper oxide) · Cuprous chloride · Cuprous oxide

UK workplace exposure limits

LimitValueApplies to
8-hour TWA 1 mg/m³
15-minute STEL 2 mg/m³

Sampling methods

MethodSamplingMedium AnalysisPart numbers
NIOSH 7029
Copper (dust and fume) by AAS
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter in preloaded cassette (or Solu-CAP cassette) 225-3-01
225-8517
225-1
NIOSH 7300
Elements by ICP (Nitric/perchloric acid ashing)
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter in 37mm cassette (or Solu-CAP cassette) 225-3-01
225-8517
225-1
NIOSH 7301
Elements by ICP (Aqua regia ashing)
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter (or Solu-CAP cassette) or 5µm PVC filter in 37mm cassette 225-3-01
225-8517
225-803
225-1
NIOSH 7303
Elements by ICP -AES (Hot block/HCl/HNO3 Digestion)
Method document (opens in a new tab)
Active (pump) Filter Cassette 225-3-01
225-1
NIOSH 9102
Elements on wipes by ICP -AES
Method document (opens in a new tab)
Surface Wipe 225-2414
OSHA 206
Metal & metalloid particulates from solder operations by ICP
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter in 37mm cassette 225-3-01
225-1
OSHA ID-121
Metal & metalloid particulates by AAS
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter in preloaded cassette 225-3-01
225-1
OSHA ID-125G
Metals & metalloid particulates by ICP
Method document (opens in a new tab)
Active (pump) 0.8µm MCE filter in 25mm or 37mm cassette 225-3100
225-3-01
225-1
BS ISO 15202-1: 2020
Determination of metals and metalloids in airborne particulate matter by ICP
Active (pump) IOM with 0.8µm MCE filter 225-70A
225-1930

Methods and limits as published by their agencies and summarised by SKC; check the current method and the limit that applies to you before sampling.

Source: SKC Ltd (UK), Hazard Search, used with SKC's permission (opens in a new tab)