Laminar Mass Flow meters
10 models
Diese Seite gibt es auch auf Deutsch.
Cette page existe aussi en français.
Variable-area flow meters for gases and liquids: direct visual indication with no power required. Rib-guided or fluted metering tubes with 65 or 150 mm scales, direct-reading or millimeter graduations, with optional needle or high-precision metering valves — from Aalborg Instruments.
Low-flow precision rotameter with direct-reading or mm scales and optional control valve.
±2% FS · 65/150 mm
ANALYT-MTC
Multiple-tube version of the P meter — 2 to 6 channels for metering or manifolding several streams.
±2% FS · 2–6 tubes
ANALYT-MTC
PTFE and glass wetted parts for corrosive gases and liquids; single tube with optional needle valve.
±2% FS · 65 °C · 6.7 bar
ANALYT-MTC
Multiple-tube PTFE and glass meter for corrosive streams in individual channels or manifolded mixing.
±2% FS · 65 °C · 6.7 bar
ANALYT-MTC
Single-tube meter built for fast flow-tube changes and cleaning, with the same tubes as the P meter.
±2% FS · 13.8 bar · 120 °C
ANALYT-MTC
Blends two or three gases in variable concentrations at the point of use; 150 mm tubes, mm scale.
±2% FS · 150 mm
ANALYT-MTC
Rugged brass or 316 stainless meter for medium air and water flows, with dual rotatable scales.
±5% FS · to 900 L/min air
ANALYT-MTC
Medium-range brass or stainless meter with direct-reading scales for argon, CO₂, helium, N₂ and O₂.
±5% FS · 5 gases
ANALYT-MTC
PTFE-wetted medium-range meter for corrosive air or water, 100–625 L/min air, dual rotatable scales.
±5% FS · to 625 L/min air
ANALYT-MTC
Heavy-duty stainless-steel industrial meter for water to 440 L/min and air to 7000 L/min.
±3% FS · to 7000 L/min air
ANALYT-MTC
All-PTFE, PFA and PCTFE meter for corrosive or ultra-pure liquids, 75 mL/min to 45 L/min.
±5% FS · to 45 L/min
ANALYT-MTC
In-line all-PTFE meter for high-purity or corrosive liquids from 125 mL/min to 45 L/min.
±5% FS · to 45 L/min
ANALYT-MTC
Bench kit with interchangeable 150 mm flow tubes and floats in aluminium, stainless or PTFE cases.
ANALYT-MTCA rotameter shows the flow directly on a scale, with no power required, so the choice is about flow range, wetted materials and tube count. Accuracy is ±2% FS as standard and ±1% FS when calibrated. For low flows, the Model P flow meters are precision rotameters with direct-reading or mm scales and an optional control valve; the Model Px is the multiple-tube version with 2 to 6 channels, and the Model S is built for fast flow-tube changes and cleaning.
For medium flows, the Model V medium range flow meters use brass or 316 stainless steel for air and water, to 900 L/min air. The Model xV has direct-reading scales for argon, CO₂, helium, N₂ and O₂. For heavy-duty service, the Model M industrial flow meters are stainless steel, for water to 440 L/min and air to 7000 L/min.
The Model T flow meters have PTFE and glass wetted parts for corrosive gases and liquids, and the Model Tx is the multiple-tube version. For corrosive air or water at medium flow, the Model V PTFE covers 100–625 L/min air. For liquids, the Model F PTFE flow meters and the Model L PTFE-PFA flow meters go up to 45 L/min.
Need to set the flow as well as read it? A needle (CV) or metering (MFV) valve is optional; see rotameters with needle valve.
Our application engineers aim to reply within 3 business hours.