Laminar Mass Flow Controllers
5 models
Diese Seite gibt es auch auf Deutsch.
Cette page existe aussi en français.
Rotameters with a built-in needle or metering valve: the same glass tube both reads and sets the flow by hand. Variable-area design in aluminium, stainless steel or PTFE bodies for gases and liquids, with optional high-precision metering valves for low-flow resolution — from Aalborg Instruments.
Low-flow precision rotameter with direct-reading or mm scales and optional control valve.
±2% FS · 65/150 mm
ANALYT-MTC
PTFE and glass wetted parts for corrosive gases and liquids; single tube with optional needle valve.
±2% FS · 65 °C · 6.7 bar
ANALYT-MTC
Multiple-tube PTFE and glass meter for corrosive streams in individual channels or manifolded mixing.
±2% FS · 65 °C · 6.7 bar
ANALYT-MTC
Single-tube meter built for fast flow-tube changes and cleaning, with the same tubes as the P meter.
±2% FS · 13.8 bar · 120 °C
ANALYT-MTC
Blends two or three gases in variable concentrations at the point of use; 150 mm tubes, mm scale.
±2% FS · 150 mm
ANALYT-MTC
Rugged brass or 316 stainless meter for medium air and water flows, with dual rotatable scales.
±5% FS · to 900 L/min air
ANALYT-MTC
Medium-range brass or stainless meter with direct-reading scales for argon, CO₂, helium, N₂ and O₂.
±5% FS · 5 gases
ANALYT-MTC
PTFE-wetted medium-range meter for corrosive air or water, 100–625 L/min air, dual rotatable scales.
±5% FS · to 625 L/min air
ANALYT-MTC
All-PTFE, PFA and PCTFE meter for corrosive or ultra-pure liquids, 75 mL/min to 45 L/min.
±5% FS · to 45 L/min
ANALYT-MTC
In-line all-PTFE meter for high-purity or corrosive liquids from 125 mL/min to 45 L/min.
±5% FS · to 45 L/min
ANALYT-MTC
Bench kit with interchangeable 150 mm flow tubes and floats in aluminium, stainless or PTFE cases.
ANALYT-MTCThe valve decides the use. A needle valve (CV) sets the flow by hand; the high-precision metering valve (MFV) is worth its higher cost when you need sensitive control and fine resolution, especially with tubes for very low flows. The Model P flow meters are low-flow precision rotameters with direct-reading or mm scales, ±2% FS and an optional control valve. The Model S flow meters take the same tubes and valves but are built for fast tube changes and cleaning. The Model G gas proportioner meters blend two or three gases at the point of use. The Rotameter Kit is a bench kit with interchangeable 150 mm tubes and floats: aluminium for non-corrosive fluids, stainless steel for corrosives, PTFE for corrosive service at lower pressure or high purity.
The Model T flow meters have PTFE and glass wetted parts for corrosive gases and liquids, as a single tube with an optional needle valve. The Model Tx flow meters are the multiple-tube version for several streams in individual channels or as a controlled mixer; for vacuum service, order the valves at the outlet. For liquids, the Model F PTFE flow meters are in-line all-PTFE meters from 125 mL/min to 45 L/min, and the Model L PTFE-PFA flow meters use PTFE, PFA and PCTFE for corrosive or ultra-pure liquids up to 45 L/min.
The Model V medium range flow meters use brass or 316 stainless steel for medium air and water flows up to 900 L/min air. The Model V PTFE is the PTFE-wetted version for corrosive air or water, 100–625 L/min air. The Model xV has direct-reading scales for argon, CO₂, helium, N₂ and O₂.
Our application engineers aim to reply within 3 business hours.