Liquid Flow Controllers

Laminar liquid flow controllers that hold a volumetric setpoint while reporting flow, liquid pressure and temperature. Stainless steel wetted parts over a 0.5 mL/min to 10 L/min range, with analog, serial and fieldbus control — from ANALYT-MTC.

All models

1 model

What does a liquid flow controller regulate, and over what range?

The 358 Series LC Liquid flow controllers hold a stable volumetric flow rate and report volumetric flow, liquid pressure and liquid temperature. Control runs from 2% to 100% of full scale across 0.5 mL/min to 10 L/min. Accuracy is ±2% FS and repeatability ±0.2% FS. Static pressure is rated to 6.9 bar(g) and the operating temperature is -10 to +60 °C.

Which materials and connections suit my liquid?

The standard (LC) wetted parts are stainless steel with Viton and FFKM; the LCR variant adds PTFE, and an anti-corrosive option is available. Connections follow the flow range: an M5 female thread at the lowest flows, then 1/8′′ NPT, 1/4′′ NPT and 1/2′′ NPT for the highest flows, with compression, face seal, push-to-connect, BSPP and SAE options.

Which signals and options does it offer?

Analog signals are 4–20 mA, 0–5 VDC, 1–5 VDC and 0–10 VDC. Digital options are RS-232 serial by default, RS-485, Modbus RTU, Modbus TCP/IP, DeviceNet, EtherCAT, EtherNet/IP and PROFIBUS. A backlit LCD readout (optional colour TFT display) and an optional volume totalizer complete the options.

Questions about these products?

Our application engineers aim to reply within 3 business hours.

Ask an engineer