The Aalborg TIO totalizer is an accessory designed for GFM and GFC flow meters and controllers. It adds an analog input/output interface (0-5 Vdc, 5-10 Vdc, 0-10 Vdc, 4-20mA) where flow indications or control and totalizer or alarm functions are required. It also re-transmits the flow rate and/or totalizer functions via an optically-isolated pulse output or serial communication, if desired. It is part of the thermal mass flow meters range.

What does the TIO flow totalizer display and communicate?

The graphical LCD (128×64) has large 13mm (0.51″) digits for the flow rate and 5.5mm (0.21″) for the total. The user can set it to show different combinations of flow rate, totalizers, flow alarms and diagnostic events at the same time.

The digital interface is RS-232 or RS-485 (multi-drop capability up to 64 devices; a maximum of 255 addresses for the RS-485 option only). The module runs on 12 – 26 Vdc.

Which TIO kit or accessories fit a GFM or GFC?

For a GFM:

  • KIT-TM-DD: shielded cable with two 9 pin D-connectors for process signals and communication branch. Required for digital communication with Host PC or PLC.
  • KIT-TM-RD: 4 wire cable between GFM RJ11 and TIO 9 pin D-connector. 5-10 Vdc input, no digital communication.
  • KIT-TM-FD: flat wire cable between GFM and TIO 9 pin D-connectors. 0-5Vdc input, no digital communication.

For a GFC, shielded cable with EUROPE plug 230 Vac:

  • KIT-TC-230EU-2C: 12 Vdc power supply, communication branch.
  • KIT-TC-230EU-2N: 12 Vdc power supply, without digital communication.
  • KIT-TC-230EU-4C: 24 Vdc power supply, communication branch.
  • KIT-TC-230EU-4N: 24 Vdc power supply, without digital communication.

How is the TIO configured?

All configuration parameter settings are easily accessed via a simple user-interface menu driven by a 6 button keypad, which can be password-protected.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer