SKC

PTFE (Polytetrafluoroethylene) Filters

PTFE air sampling filter in 13–47 mm, 0.3–10 µm: hydrophobic, resistant to acids, bases and solvents, with a low tare mass and temperature resistant to 260°C.

Ask an engineer

A PTFE (polytetrafluoroethylene) air sampling filter is a hydrophobic membrane that is strong and resistant to acids, bases and solvents. Low background gives interference-free chemical determinations, and the low tare mass supports accurate gravimetric analysis. The range covers 0.3–10 µm pores in 13–47 mm diameters, in the filters and cassettes category.

What is a PTFE membrane filter used for?

PTFE filters are the versatile choice for size-selective samplers, for gravimetric, chemical and microscopic analysis of sample particulate. They are temperature resistant to 260°C and autoclavable, and ideal for aerosol sampling, especially in environments also containing water vapour. PTFE filters are also used for air venting and gas filtration. The 13 mm filter (225-17-03) meets NIOSH Method 5517 specifications. Back pressure can vary within the same lot.

Which PTFE filter for particulate matter samplers?

PTFE filters with a PMP support ring (225-1709, 225-1747 and 225-1711) are the recommended filters for samplers such as the SKC Personal Modular Impactor (PMI), the Sioutas Impactor, the IMPACT Sampler, the Personal Environmental Monitor (PEM) and the Button Sampler. Their low back pressure allows longer sampling periods at higher flow rates to enhance sensitivity.

Which PTFE filter for lactic acid or metalworking fluids?

  • Lactic acid. The US pharmaceutical industry uses lactic acid powder as the surrogate particulate to detect fugitive emissions from drug compounding and pill manufacturing. SKC developed a 25 mm conductive polypropylene cassette with 1.0 µm PTFE filter and polypropylene support pad to minimise wall losses and permit in-situ extraction for enhanced recovery at nanogram levels. See PTFE filter 225-1725.
  • Metalworking fluids (NIOSH 5524). PTFE filter 225-27-07, 2.0 µm pore size with laminated PTFE support, may be used with the thoracic Personal Parallel Impactor (PPI) to sample thoracic particulate according to NIOSH Method 5524.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer