SKC

Disposable Parallel Particle Impactors

The SKC disposable PPI sampler combines the performance of reusable aluminium PPI models with the convenience of a single-use sampler, for respirable or thoracic PM at 2, 4 or 8 L/min.

Ask an engineer

The SKC disposable PPI sampler (parallel particle impactor) is a high performance Thoracic and Respirable PM sampler. The patented* design has the power of 4 impactors in one small, conductive aluminium sampler, to provide the closest match to the ACGIH/ISO/CEN thoracic or respirable conventions. Disposable pre-oiled porous plastic impaction substrates reduce the negative effects that particle buildup and bounce can have on the sample accuracy, by firmly trapping larger particles. Unlike other samplers, the sampling efficiency of the PPI is not dependent on the collected particle type.

Which disposable PPI for respirable or thoracic dust?

  • Lightweight – weighs only 93g
  • 8 L/min Respirable model provides enhanced sampling sensitivity for WEL/TWA silica and other compounds with low target concentrations. Ideal for short term task monitoring. It is referenced in MDHS 14/4.
  • 4 L/min Respirable model provides higher flow option and use of intrinsically safe personal pumps.
  • 2 L/min Respirable model is ideal for standard WEL/TWA sampling.
  • 2 L/min Thoracic model is ideal for metal working fluids, or WEL/TWA monitoring for sulphuric acid, or any other compounds with a thoracic limit. It is referenced in MDHS 14/4.

For sulphuric acid, the preloaded Thoracic PPI 225-3861 carries a 0.8 µm MCE collection filter (OSHA ID 113) and 225-3862 a Quartz collection filter (NIOSH 7908).

How does a parallel particle impactor work?

The patented* SKC Parallel Particle Impactor (PPI) samplers contain four small impactors in the inlet section of the device. Each impactor features a unique 50% cut-point to target a specific one-quarter segment of the ISO/CEN curve resulting in a precise fit along the entire curve. A sample pump pulls air through the inlet nozzle of each impactor in the inlet plate. Particles larger than each impactor’s 50% cut-point are scrubbed and retained on the porous oiled impaction substrate, while smaller particles continue to the standard 37 mm collection filter for analysis.

What does the disposable PPI come with?

Disposable PPIs are available pre-assembled with:

  • Filter, filter supports, and substrates for chemical analysis (preloaded models)

or

  • Substrates only – add your own filter and filter support for gravimetric analysis

* US Patent No. 7,073,402

Reusable aluminium Parallel Particle Impactors (PPIs) are also available. See more particulate samplers.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer