Aalborg

DFC Mass Flow Controller

DFC mass flow controller: programmable thermal mass flow controller with digital signal processing, RS-232/RS485 interface and flow ranges up to 100 sL/min N2.

Ask an engineer

The DFC mass flow controller from Aalborg is a compact digital controller for the flow rate of gases, available as DFC 26/36/46. Using thermal mass flow metering, it offers an accuracy of ± 1.0% full scale at calibration temperature and pressure, a repeatability of ± 0.15% of full scale and a digital interface. It is part of the thermal mass flow controllers range and works with dry gases only.

DFC mass flow controllers can be configured for flow ranges from 10 smL/min to 100 sL/min N2. Maximum gas pressure is 70 bar(g). For a low priced alternative in the same range, compare the GFC.

How do I control and read a DFC?

These controllers can be accessed remotely using the RS-232/RS485 interface. The mass flow can also be accessed by the analog output either in 0-5Vdc/0-10Vdc or 4-20mA. Totalizer, flow and pressure alarms can also be set by the user.

Which DFC model and fittings do I need?

The meters can be connected to the process with 1/8″, 1/4” or 3/8” compression fittings, depending on the model:

  • DFC 26: 1/8″ compression fittings
  • DFC 26/36: 1/4″ compression fittings
  • DFC 26/36/46: 3/8″ compression fittings

Optional fittings are available. They can be used as benchtop units or mounted with screws in the base.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer