GASTEC

Gastec Toxic Gas Detection System

The Gastec GST_TG-1 toxic gas kit determines unknown toxic gases in emergency response to chemical spills, or investigation after a fire.

Ask an engineer

The Gastec Toxic Gas Detection System (GST_TG-1) is for emergency response to chemical spills and investigation after a fire. The prime importance there is to quickly determine any gases present and their concentrations. With this kit it can be accomplished quickly, easily and accurately on the site, using 12 types of Gastec detector tubes and the Gas Sampling Pump. As the substances to be measured could be hazardous, adequate precautions should be taken to ensure safety. It is part of the Gastec colorimetric detector tubes.

  • Fast and easy determination of pollutants
  • Portable – no power supply required
  • Minimal training required – follow the simple flowchart
  • Cost effective
  • Minimal maintenance compared to electronic detection systems

What does the Gastec GST_TG-1 toxic gas kit include?

The kit comes in a lockable aluminium carry case weighing 5 kg and includes:

  • a Smoke Test Kit (GST_500)
  • 12 boxes of Gastec tubes
  • a Gas Sampling Pump (GST_110)
  • a 5 m extension hose (GST_350A) and 2 rubber connectors
  • a handbook

How do I identify an unknown toxic gas with the GST_TG-1?

  1. Confirm the air current direction using the Smoke Tester Kit.
  2. Connect the extension hose if necessary, to take a sample from a hard-to-reach area or from a manhole.
  3. Break off both ends of a Polytec I (part number GST_107) tube and connect it to the pump, or to the end of the extension hose if used.
  4. Pull out the handle of the pump, wait for the predetermined sampling time, and examine the tube for colour changes.
  5. Proceed with the measurements by using the 12 types of detector tubes, as directed by the Toxic Gas Determination Flowchart.
  6. Finally, determine the pollutants from the measurement results.

The pump is described under Gastec gas sampling pumps.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer