GASTEC

Gastec Airtec Tubes

Gastec Airtec tubes for measuring the quality of compressed breathing air

Ask an engineer

Gastec Airtec tubes are direct-reading detector tubes for testing the quality of compressed breathing air. The Airtec tube is a convenient, economical system for impurities such as carbon monoxide, carbon dioxide, water vapour, nitrogen oxides and oil mist. Measurement is quick and simple and does not require user training or calibration.

Tubes are supplied in packs of 10.

Which Airtec tube measures which contaminant?

  • Carbon monoxide (CO): 5 ppm – 50 ppm with GST_1A
  • Carbon dioxide (CO2): 250 ppm – 3000 ppm with GST_2A, 200 ppm – 3000 ppm with GST_2AG
  • Water vapour (H2O): 500 ppm – 5000 ppm with GST_6AH, 20 mg/m3 – 80 mg/m3 with GST_6A
  • Nitrogen oxides (NO + NO2): 0.06 ppm – 2 ppm with GST_11A
  • Oil mist: 0.2 mg/m3 – 5 mg/m3 with GST_109AD, 0.3 mg/m3 – 1.5 mg/m3 with GST_109A

Flow rate and sampling time differ from tube to tube; the Specifications tab lists them with the remaining part numbers.

How do I measure with an Airtec tube?

  1. Snap off both pre-scored ends of the tube.
  2. Insert the tube into the tube holder with the directional arrow pointing down.
  3. Adjust the flowmeter to the specified flow rate.
  4. After the required time, note where the colour stain stops and immediately take the measurement from the direct-reading tube.

Is there a kit for testing compressed breathing air?

A kit for measuring compressed breathing air for impurities is available, using the carbon monoxide, carbon dioxide, water vapour and oil mist Airtec tubes. The other Gastec tube types are in the Gastec detector tubes category.

Questions about this product?

Our application engineers aim to reply within 3 business hours.

Ask an engineer