Split2 Particulate Monitor
A passive dust monitor, designed for personal or area monitoring for respirable, thoracic, or inhalable dust.
Downloads
The Split2 is designed for personal or area monitoring for inhalable or respirable dust. It is a passive dust monitor that can become an active monitor/sampler by combining it with a 2 L/min sample pump and IOM sampling head or GS-3 Cyclone, for concurrent real-time dust monitoring and gravimetric dust sampling.
- Accurate over a wide measuring range
- Simple operation and instantaneous display of TWA, STEL, Minimum, Maximum in mg/m3
- Can be used as an active monitor by combining with a sample pump
- Operates for over 8 hours using rechargeable NiMH battery
- Extended running time using AC charger
- Compact and lightweight
- Backlit display for use in dim light conditions
- Audible alarm with adjustable threshold
- Automatic data logging
- Easy to use DustComm Pro Software for data downloading, trend analysis and comprehensive reporting of concentration changes over time
| Flow Rate | 2 L/min using an external pump (not included) |
| Accuracy | ±10% to NIOSH Method 0600 using SAE fine test dust |
| Sensing Range | 0.01 to 200 mg/m3 |
| Display Resolution | 0.01 mg/m3 |
| Particle Size Range | 0.1 to 100 µm |
| Measurement Precision | ±0.02 mg/m3 |
| Calibration | NIOSH gravimetric using NIST-traceable SAE fine test dust |
| Displayed Particle Concentration | Instantaneous, TWA, STEL, Minimum, Maximum |
| Active Mode | Use with sample pump at 2 L/min |
| Power | Rechargeable NIMH battery |
| Operating Time | ≥8 hours |
| Charging Time | 12 hour |
| Digital Output | RS-232 |
| Data Storage | 21,500 data points |
| Sampling Rate | 1 second, 1 minute, 10 minutes |
| Temperature | Operating: 0 to +50°C Storage: -20 to +60°C |
| Dimensions | Unit: 18 x 8 x 4.5 cm Sensor: 4.4 x 3.8 cm |
| Weight | 780 g with batteries |
Split2
| Description | Part Number |
|---|---|
| Split2 Monitor Kit, includes: Monitor in carry pouch with detachable strap, detachable sensor with lapel clip, IOM sampling head, 110-240V AC Charger, calibration standard and zeroing filter, computer RS-232 cable, USB Memory Stick with instruction manual and DustComm Pro Software, factory calibration certificate | 770-300A |
Split2 Accessories
| Description | Part Number | |
|---|---|---|
| Respirable Impactor, GS-3 Cyclone, used in conjunction with a sample pump | 225-103 |  |
| Adaptor for Respirable Impactor, required when using GS-3 Cyclone | 770-313 |  |
| IOM Adaptor, for mounting IOM sampling head on Split2 | 770-4204 |  |
| IOM sampler in plastic complete with two part plastic filter cassette and clip | 225-70A |  |
| IOM foam plug for respirable and multi-dust sampling (pack of 10) | 225-772 |  |
| Calibration span accessory, for calibrating the sensor | 770-322 |  |
| Calibration Chamber, for calibrating and setting pump airflow when using a GS-3 Cyclone | 225-112 |  |
| Zeroing Accessory, for clean-air zeroing of Split2 sensor when using IOM Inhalable sampling head | 770-4202A |  |
| Zeroing Accessory, for clean-air zeroing of the instrument | 770-311 | |
| Chek-mate flowmeter 500-5000 ml/min, recommended for calibrating the Inhalable IOM Sampling Head, used in conjunction with a sample pump | 375-0550 |  |
| Calidaptor, adaptor for calibrating the Inhalable IOM Sampling Head | 391-01 |  |
| Sampling Wand, hand held and mounts to sensor for area monitoring | 770-306 |  |
| Tripod Stand, for use when using the Split2 for area monitoring | 770-307 |  |
| RS232 Computer Interface Cable | 770-114 |  |
| AC Charger 110-240V, can be used to operate Split2 for extended running time | 770-320 | |
| Replacement NiMH Battery Pack for Split2 | 770-303 |  |
| DustComm Pro Software on USB Flash Drive | 770-225 |