Elemental Mercury Passive Sampler
High accuracy, sensitivity and capacity for measurement of Mercury in the vapour phase. For OSHA Method ID-140
The SKC 520 Series Elemental Mercury Sampler measures worker exposure levels as a Time-Weighted Average (TWA) and permits the positive analysis of elemental mercury vapour. It is designed for analysis using standard laboratory equipment, and therefore, the cost per measurement is kept to an absolute minimum compared to other samplers. The sampler only samples elementary mercury (Hg) in the vapour phase; it does not sample elemental Hg in the particulate phase or organic mercury compounds.
Mercury vapour enters the sampler by positive, controlled diffusion so that a known sample volume is taken for a given period of time. Mercury is completely adsorbed onto the solid sorbent. The sorbent capsule is then taken to an accredited laboratory where the sorbent is dissolved in acid and analyzed by flameless atomic absorption. The sampler holder is cleaned and reused, thereby reducing sampling costs.
- Extensively field tested
- Validation based on OSHA Method ID-140
- Meets NIOSH and OSHA standards
- Lowest cost per measurement available
- Reusable capsule holder
- Replaceable sorbent capsule
- Easy-to-use
- Clips to a worker’s collar or pocket
- No pump needed
- Long-term sampling up to 120 hours
- High accuracy and sensitivity
- Positive analysis of inorganic mercury
- Removable sorbent capsule eliminates false high readings due to contamination of badge housing
- No moisture or chlorine interferences
- Extensive field testing and chamber studies show accuracy without interference from either moisture or chlorine
- Simple analysis
- Uses standard laboratory equipment and analytical methods
Note: For sampling low levels of mercury, use a sorbent tube.
| Background | 0.02 µg/200mg section |
| Limit of Detection | 0.01 µg |
| Capacity | >30 µg mercury per capsule |
| Analysis | Flameless atomic absorption |
| Weight | 14 g |
| Sampling Rate | 0.020 L/min (20 ml/min) at 20°C and 1013 mbar |
Elemental Mercury Passive Samplers
| Description | Pack Size | Part Number | |
|---|---|---|---|
| Reusable Elemental Mercury Sampler capsule holder | Each | 520-03 |  |
| Reusable Elemental Mercury Sampler capsule holder | 5 | 520-03A | |
| Sorbent Capsules contain Anasorb® C300* and include replacement foams and resealable bags | 10 | 520-02A |  |
| Sorbent Capsules contain Anasorb® C300* and include replacement foams and resealable bags | 30 | 520-02C | |
Accessories
| Description | Part Number | |
|---|---|---|
| Stand for Indoor Sampling | 690-302 |  |
| Shelter for Outdoor Sampling | 690-303 |  |