---
title: "Aalborg service center in Europe — Analyt-MTC"
url: https://analyt-mtc.com/services/aalborg-service-center/
lang: en
alternates:
  en: https://analyt-mtc.com/services/aalborg-service-center/
  de: https://analyt-mtc.com/de/dienstleistungen/aalborg-service-center/
  fr: https://analyt-mtc.com/fr/services/centre-de-service-aalborg/
---

Aalborg European Service Center

# The Aalborg European Service Center

  ![Aalborg Instruments headquarters building among autumn trees](https://analyt-mtc.com/media/aalborg-building.jpg)

The only authorized service center for Aalborg Instruments in Europe — calibration, repair, and cleaning for Aalborg mass flow and pressure instruments.

Last updated · October 2026

**Only** authorized center in Europe **40+ years** Aalborg partnership **To spec** factory procedures

  ![Calibration floor at the Aalborg factory](https://analyt-mtc.com/media/aalborg-factory-floor.jpg)

## Forty years of partnership, one European service address

For over forty years we have worked closely with Aalborg Instruments, and today we are the only authorized service center for Aalborg in Europe. Instruments serviced here are handled to factory specifications, with product knowledge that comes straight from the source.

For European customers that means no transatlantic shipping, no customs paperwork toward the US, and significantly shorter turnaround.

Application questions are welcome too — advising on the instruments we sell and service is part of the job, not a separate product.

  ![Aalborg mass flow controllers on a calibration manifold at the Aalborg factory](https://analyt-mtc.com/media/aalborg-factory-calibration.jpg)

## Authorized by Aalborg

The authorization is the laboratory's own: Aalborg certifies this facility as its European service center, and every Aalborg instrument serviced here is handled to factory procedures and specifications.

## Aalborg calibration, repair and cleaning at the center

### Calibration

Every Aalborg instrument is calibrated on our mass-flow reference bench, documented as-found/as-left, traceable to national standards.

[Details →](https://analyt-mtc.com/services/calibration/)

### Repair

Electronic and mechanical repairs, down to board level, followed by recalibration.

[Details →](https://analyt-mtc.com/services/repair/)

### Cleaning

Ultrasonic cleaning of flow bodies and wetted parts, as maintenance or ahead of recalibration.

## How to send in your Aalborg instrument for repair

One procedure covers every device we service: two documents, a bare, properly packed instrument, and tracking from arrival to return shipment.

[How sending in works →](https://analyt-mtc.com/services/send-in/)

## About Aalborg Instruments

Aalborg Instruments & Controls is a renowned manufacturer of gas mass flow measurement and control devices. Read more about the brand and our distribution partnership on the Aalborg brand page.

[Aalborg at Analyt-MTC →](https://analyt-mtc.com/aalborg/)

## Aalborg instrument due for service?

Send us your instrument, or ask our engineers first — we usually reply the same day.

[Request service](https://analyt-mtc.com/contact/?service=1)