---
title: "Thermal mass flow controllers — Analyt-MTC"
url: https://analyt-mtc.com/catalog/thermal-mass-flow-controllers/
lang: en
alternates:
  de: https://analyt-mtc.com/de/catalog/thermische-massenflussregler/
  en: https://analyt-mtc.com/catalog/thermal-mass-flow-controllers/
  fr: https://analyt-mtc.com/fr/catalog/regulateurs-de-debit-massique-thermique/
---

# Thermal Mass Flow Controllers

Thermal mass flow controllers that measure gas mass flow and drive a built-in valve to hold the setpoint. Aluminium or 316 stainless steel bodies with analog 0-5 V / 4-20 mA and RS-232/485 digital control, for ranges from 10 smL/min to 1000 sL/min N2 — from Aalborg Instruments and ANALYT-MTC.

![Aalborg Instruments](https://analyt-mtc.com/_astro/aalborg.CdV0aRZh.svg)![Aalborg Instruments](https://analyt-mtc.com/_astro/aalborg-white.Dzm-5F8S.svg) ![ANALYT-MTC instruments](https://analyt-mtc.com/_astro/am-mark.CxS3oH5U.svg)![ANALYT-MTC instruments](https://analyt-mtc.com/_astro/am-mark-white.Vm7eVKE8.svg)

## At a glance

-   ±1.0% FS (GFC 17/37/47, DFC)
-   Ranges 10 smL/min to 1000 sL/min N2
-   Response 1–5 s to setpoint
-   Aluminium or 316 stainless steel body
-   Analog 0-5 V / 4-20 mA output

## All models

2 models

-     ![](https://analyt-mtc.com/illustrations/gfc.webp)
    
    ### [GFC](https://analyt-mtc.com/catalog/product/gfc/)
    
    Thermal gas controller with integrated solenoid valve and tiltable LCD; aluminium or stainless.
    
    ±1% FS · to 1000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/gfc/)
    
-     ![](https://analyt-mtc.com/illustrations/dfc.webp)
    
    ### [DFC Mass Flow Controller](https://analyt-mtc.com/catalog/product/dfc/)
    
    Digital thermal gas controller with RS-232/485, totalizer and flow and pressure alarms.
    
    ±1% FS · to 100 sL/min
    
    Aalborg
    
    [Details →](https://analyt-mtc.com/catalog/product/dfc/)
    

## Related families

  ![](https://analyt-mtc.com/illustrations/358-series-mc-mass-flow-controllers.webp)

### [Laminar Mass Flow Controllers](https://analyt-mtc.com/catalog/laminar-mass-flow-controllers/)

5 models

  ![](https://analyt-mtc.com/illustrations/358-series-lc-liquid-flow-controllers.webp)

### [Liquid Flow Controllers](https://analyt-mtc.com/catalog/liquid-flow-controllers/)

1 model

  ![](https://analyt-mtc.com/illustrations/model-p-flow-meters.webp)

### [Rotameters With Needle Valve](https://analyt-mtc.com/catalog/rotameters-with-needle-valve/)

11 models

## How do I choose a thermal mass flow controller for gas?

Both controllers measure gas mass flow with a heat-transfer sensor and drive a built-in valve to the setpoint. Pick by what you need around the valve. The [GFC](https://analyt-mtc.com/catalog/product/gfc/) is a thermal gas controller with an integrated solenoid valve and a tiltable LCD, in aluminium or stainless steel, reaching 1000 sL/min, with ±1% FS on the GFC 17, 37 and 47. The [DFC Mass Flow Controller](https://analyt-mtc.com/catalog/product/dfc/) is a digital thermal gas controller with RS-232/485, a totalizer and flow and pressure alarms. Its range goes to 100 sL/min, also with ±1% FS.

Response to the setpoint is 1–5 s across the GFC models and, for the DFC, 1.0 to 2.0 second.

## What should I check before ordering a gas mass flow controller?

Start with the control signal. Both give a linear 0-5 Vdc output; 4-20 mA is standard on the GFC and optional on the DFC, and the DFC adds digital RS-232/485 control. Then check line pressure: the DFC is rated to 70 bar(g), the GFC 17, 37 and 47 to 70 barg.

Check the gas and body material as well. Gas temperature is 0°C to 50°C on both, calibration is performed at standard conditions of 1013 hPa and 21.11°C, and the DFC is for dry gases only. The GFC comes in an aluminium or 316 stainless steel body; the DFC uses 316 stainless steel.

If you only need to read the flow, not hold it, see the [thermal mass flow meters](https://analyt-mtc.com/catalog/thermal-mass-flow-meters/).

## Questions about these products?

Our application engineers aim to reply within 3 business hours.

[Ask an engineer](https://analyt-mtc.com/contact/?ask=1)
