---
title: "Aalborg SMVI intelligent control valve — Analyt-MTC"
url: https://analyt-mtc.com/catalog/product/smvi-intelligent-control-valve/
lang: en
alternates:
  de: https://analyt-mtc.com/de/catalog/product/smvi-intelligentes-regelventil/
  en: https://analyt-mtc.com/catalog/product/smvi-intelligent-control-valve/
  fr: https://analyt-mtc.com/fr/catalog/product/smvi-vanne-de-regulation-intelligente/
---

![SMVI intelligent control valve, 3D view](https://analyt-mtc.com/media/SMVI30-SVE6_3D.png)

ANALYT-MTC

# SMVI intelligent control valve

Aalborg SMVI intelligent control valve: stepping motor metering valve for gases or liquids, with four control modes and an isolated RS-485 interface.

Documents

[SMVI Intelligent Control Valves — Technical data sheet · Rev. 1](https://analyt-mtc.com/documents/smvi-spec-sheet-en.pdf) ([text version](https://analyt-mtc.com/documents/smvi-spec-sheet-en.md)) [SMVI Intelligent Control Valve — Operating manual · Rev. 1](https://analyt-mtc.com/documents/smvi-manual-en.pdf) ([text version](https://analyt-mtc.com/documents/smvi-manual-en.md))

The Aalborg SMVI intelligent control valve is a two-way metering needle valve for gases or liquids. A high-precision linear stepping motor drives the valve spindle; the needle moves 0.000125″/step, or 0.0000078125″/step in micro-stepping mode. When de-energized, the valve stays in its last position.

## What changed against the SMV valve?

The SMVI keeps the valve of the [SMV stepping motor valve](https://analyt-mtc.com/catalog/product/smv-stepping-motor-valve/) and adds digital electronics: four control modes in one valve, a galvanically isolated RS-485 interface with an ASCII command set, a push-button that shows and selects the control mode and the analog input on site, and CLOSE and PURGE override inputs with a green and a red light on top of the valve. Power input is universal 12 to 24 Vdc. The SMV remains available for direction/speed control.

## Which control modes does the SMVI support?

-   **Analog interface**: the valve opening is linearly proportional to a 0-5 Vdc, 1-5 Vdc, 4-20 mA or 0-10 Vdc control signal. The 0-10 Vdc option needs a jumper on the PCB and must be specified with the order.
-   **Digital RS-485 interface**: a PLC or PC sends the valve opening in % of full opening, 0.00 to 100.00% with 0.01% resolution, and has access to all configuration and process parameters.
-   **Direction / speed**: the legacy mode of the [SMV stepping motor valve](https://analyt-mtc.com/catalog/product/smv-stepping-motor-valve/), with a TTL (low active) direction signal and an analog speed signal.
-   **Step clock / direction**: each falling edge on the step clock input moves the needle one microstep, closing or opening according to the direction input.

The CLOSE and PURGE signals override the valve control: connecting the CLOSE input to ground closes the valve (green light), connecting the PURGE input to ground opens it fully (red light).

## Which SMVI size for which flow?

At 20 psi differential pressure and 70 °F, the SMVI20 passes 200 sL/min air or 5.6 L/min water with 3/8″ compression fittings, the SMVI30 500 sL/min air or 14.2 L/min water with 1/2″ compression fittings, and the SMVI40 1000 sL/min air or 28 L/min water with 3/4″ FNPT or 3/4″ compression fittings. Each size comes in aluminum or 316 stainless steel. The [SMV stepping motor valve](https://analyt-mtc.com/catalog/product/smv-stepping-motor-valve/) comes in the same three sizes. Browse all [valves](https://analyt-mtc.com/catalog/valves/).

| Parameter | Value |
| --- | --- |
| Materials | **Aluminum models** : Aluminum housings and valve blocks, PFA closing pins. / **Stainless steel models** : 316 stainless steel valve blocks, PTFE-lined aluminum housing blocks and PFA closing pins. |
| Seals | FKM; Buna®, EPR or FFKM optional |
| Maximum flow rates | 1000 sL/min (air), 28 L/min (H2O), at 20 psi differential pressure, 70 °F |
| Connections | 3/8″, 1/2″ and 3/4″ compression, 3/4″ FNPT |
| Control modes | Analog interface, digital RS-485 interface, direction / speed (legacy SMV mode), step clock / direction |
| Analog control signals | 0-5 Vdc, 1-5 Vdc, 0-10 Vdc (100K input impedance); 4-20 mA (250 Ω input impedance). 0-10 Vdc must be specified with the order. |
| Digital interface | Galvanically isolated RS-485 transceiver, two wires, half duplex; ASCII command set; 9600 baud default |
| Direction and step clock inputs | Digital 5 V TTL (10K input impedance), do not apply more than 5.5 Vdc. Direction CLOSE < 0.8 Vdc, OPEN > 2 Vdc; step clock active low, one microstep at each falling edge. |
| CLOSE / OPEN (PURGE) override inputs | TTL active low (< 0.8 Vdc), do not apply more than 5.5 Vdc. Green light on top of the valve for CLOSED, red light for fully OPEN. |
| Resolution | 0.000125″/step; 0.0000078125″/step in micro-stepping mode |
| Electrical connections | 9-pin “D”-connector, located at the side of the valve; RS-485 on a 3-pin audio connector |
| Power input | Universal 12 to 24 Vdc @ 800 mA (maximum current), protected by a 900 mA resettable fuse |
| Response time | 100 ms time constant |
| Pressure drop at 100% full-scale flow | SMVI20 @ 200 sL/min: 5 PSID (350 mbar) / SMVI30 @ 500 sL/min: 7 PSID (490 mbar) / SMVI40 @ 1000 sL/min: 10 PSID (700 mbar) |
| Maximum operating pressure | 500 PSIG (35 bar g) |
| Maximum differential pressure | 50 PSID (3.45 bar) |
| Gas and ambient temperature | 32–122 °F (0–50 °C) |
| Ingress protection | IP40 |
| External leak integrity | 1 x 10⁻⁷ sccs He maximum to the outside environment |
| Internal leak in closed position | Up to 0.5% of full-scale range @ 30 PSID |
| Materials in contact with the fluid | **Aluminum models (-A)** : Anodized aluminum, brass and 316 stainless steel, FKM O-rings. / **Stainless steel models (-S)** : 316 stainless steel, FKM O-rings. / Optional O-rings: Buna-N®, EPR or FFKM. |

| Model | Maximum Flow Rate AIR (sL/min) | Maximum Flow Rate H2O (L/min) | CV | Connections | Material |  |
| --- | --- | --- | --- | --- | --- | --- |
| **SMVI20** | 200 | 5.6 | 0.336 | 3/8″ compression | Aluminum or stainless steel |  |
| **SMVI30** | 500 | 14.2 | 0.855 | 1/2″ compression | Aluminum or stainless steel |  |
| **SMVI40** | 1000 | 28 | 1.735 | 3/4″ FNPT or 3/4″ compression | Aluminum or stainless steel |  |

## Questions about this product?

Our application engineers aim to reply within 3 business hours.

[Ask an engineer](https://analyt-mtc.com/contact/?ask=1&about=SMVI%20intelligent%20control%20valve)
