---
title: "Ethylene oxide passive sampler, 0.1–4 ppm — Analyt-MTC"
url: https://analyt-mtc.com/catalog/product/skc-ethylene-oxide-passive-samplers/
lang: en
alternates:
  de: https://analyt-mtc.com/de/catalog/product/ethylene-oxide-passive-samplers/
  en: https://analyt-mtc.com/catalog/product/skc-ethylene-oxide-passive-samplers/
---

![Ethylene Oxide Passive Samplers](https://analyt-mtc.com/illustrations/skc-ethylene-oxide-passive-samplers.webp)

SKC

# Ethylene Oxide Passive Samplers

SKC ethylene oxide passive samplers (575 Series) sample ethylene oxide, which is used to sterilise medical equipment and supplies, with the same sorbent as active OSHA Method 1010.

Documents

[SKC VOC Chek 575 Passive Samplers — Technical data sheet · Rev. 1](https://analyt-mtc.com/documents/skc-voc-chek-spec-sheet-en.pdf) ([text version](https://analyt-mtc.com/documents/skc-voc-chek-spec-sheet-en.md)) [SKC VOC Chek 575 Series Passive Samplers — Instructions for use · Rev. 2](https://analyt-mtc.com/documents/skc-voc-chek-575-instructions-en.pdf) ([text version](https://analyt-mtc.com/documents/skc-voc-chek-575-instructions-en.md)) [SKC VOC Chek 575 Passive Samplers — Reference guide · Rev. 2](https://analyt-mtc.com/documents/skc-voc-chek-575-sampler-reference-en.pdf) ([text version](https://analyt-mtc.com/documents/skc-voc-chek-575-sampler-reference-en.md))

Ethylene oxide is widely used to sterilise medical equipment and supplies. Exposure health effects can range from respiratory irritation to cancer and reproductive/mutagenic effects. The SKC ethylene oxide passive sampler, part of the 575 Series, uses the same sorbent as active OSHA Method 1010. SKC has scientifically validated the sampling rate of the 575 Series passive samplers along with other critical sampling parameters to meet OSHA/ASTM/ANSI requirements.

It is ideal for hospitals, veterinary clinics and sterile instrument manufacturers, and needs no sampling pump or training. It belongs to the [Passive Samplers](https://analyt-mtc.com/catalog/passive-samplers/) range.

## What are the key figures of the ethylene oxide sampler?

-   Sampling rate: 21.2 ml/min
-   Validation range: 0.1 to 4 ppm
-   Sorbent: Anasorb 747 coated with hydrobromic acid (500 mg); the samplers contain >300 mg of sorbent, much more than other brands
-   Analysis: solvent desorption and Gas Chromatography/Electron Capture Detector (GC/ECD)
-   Shelf-life: 18 months from date of manufacture at < 4°C
-   Storage: before use < 4°C; after use < 4°C and analyze within 3 weeks
-   Dimensions: 6.3 x 3.5 x 1.5 cm

## Why choose a validated ethylene oxide passive sampler?

-   Highly accurate and reliable: proven performers in the laboratory and in the field, fully validated to ANSI/ISEA 104-1998 Standard
-   Save time and money with economical solvent desorption and GC analysis
-   Superior collection efficiency: SKC sorbents have a larger surface area for higher capacities
-   Sampling flexibility: validated for short-term and 8-hour sampling
-   Proven results: extensively tested and documented
-   So easy to use: no sampling pump or training required

## Which part number and accessories do I need?

-   575-005: pack of 5; 575-005A: pack of 25
-   575-051: desorption efficiency tubes for analysis, pack of 10; each single-section tube contains the sorbent type and amount equal to the corresponding passive sampler
-   690-302: stand for indoor sampling; 690-303: shelter for outdoor sampling

| Parameter | Value |
| --- | --- |
| Sampling Rate | 21.2 ml/min |
| Validation Range | 0.1 to 4 ppm |
| Shelf-life | 18 months from date of manufacture at < 4°C |
| Analysis | Solvent desorption, Gas Chromatography/Electron Capture Detector (GC/ECD) |
| Storage | Before use: < 4°C After use: < 4°C and analyze within 3 weeks. |
| Dimensions | 6.3 x 3.5 x 1.5 cm |

| Description | Sorbent (amount) | Pack Size | Part Number |  |
| --- | --- | --- | --- | --- |
| Passive Sampler for Ethylene Oxide | Anasorb 747 coated with Hydrobromic acid (500 mg) | 5 | **575-005** |  |
| Passive Sampler for Ethylene Oxide | Anasorb 747 coated with Hydrobromic acid (500 mg) | 25 | **575-005A** |  |

| Description | Pack size | Part Number |  |  |
| --- | --- | --- | --- | --- |
| Stand for Indoor Sampling | Each | **690-302** |   ![Ethylene Oxide Passive Samplers](https://analyt-mtc.com/illustrations/accessories/acc-690-302-3d.webp) |  |
| Shelter for Outdoor Sampling | Each | **690-303** |   ![Ethylene Oxide Passive Samplers](https://analyt-mtc.com/illustrations/accessories/acc-690-303-3d.webp) |  |
| Desorption Efficiency Tubes for analysis – each single-section tube contains the sorbent type and amount equal to the corresponding passive sampler | 10 | **575-051** |  |  |

## Questions about this product?

Our application engineers aim to reply within 3 business hours.

[Ask an engineer](https://analyt-mtc.com/contact/?ask=1&about=Ethylene%20Oxide%20Passive%20Samplers)
