---
title: "Flow control devices — Analyt-MTC"
url: https://analyt-mtc.com/catalog/flow-control-en/
lang: en
alternates:
  de: https://analyt-mtc.com/de/catalog/stroemungsregelung-de/
  en: https://analyt-mtc.com/catalog/flow-control-en/
  fr: https://analyt-mtc.com/fr/catalog/controle-du-debit/
---

# Flow Control

Flow control devices set and hold a flow rate, not just measure it: rotameters with needle valves for manual control, and thermal, laminar and liquid mass flow controllers that drive a valve to a setpoint. Manual glass-tube meters through digital multi-gas controllers, from millilitres to thousands of litres per minute.

![Aalborg Instruments](https://analyt-mtc.com/_astro/aalborg.CdV0aRZh.svg)![Aalborg Instruments](https://analyt-mtc.com/_astro/aalborg-white.Dzm-5F8S.svg) ![ANALYT-MTC instruments](https://analyt-mtc.com/_astro/am-mark.CxS3oH5U.svg)![ANALYT-MTC instruments](https://analyt-mtc.com/_astro/am-mark-white.Vm7eVKE8.svg)

Choose your technology

  ![](https://analyt-mtc.com/illustrations/358-series-mc-mass-flow-controllers.webp)

## [Laminar Mass Flow Controllers](https://analyt-mtc.com/catalog/laminar-mass-flow-controllers/)

Multi-gas control, 200:1 turndown, with pressure and temperature readout.

5 models

  ![](https://analyt-mtc.com/illustrations/358-series-lc-liquid-flow-controllers.webp)

## [Liquid Flow Controllers](https://analyt-mtc.com/catalog/liquid-flow-controllers/)

For liquids — closed-loop volumetric control, 0.5 mL/min to 10 L/min.

1 model

  ![](https://analyt-mtc.com/illustrations/model-p-flow-meters.webp)

## [Rotameters With Needle Valve](https://analyt-mtc.com/catalog/rotameters-with-needle-valve/)

Set flow by hand on a glass tube — no power or electronics.

11 models

  ![](https://analyt-mtc.com/illustrations/gfc.webp)

## [Thermal Mass Flow Controllers](https://analyt-mtc.com/catalog/thermal-mass-flow-controllers/)

Automatic gas mass flow control — heat-transfer sensor plus built-in valve.

2 models

## [Laminar Mass Flow Controllers](https://analyt-mtc.com/catalog/laminar-mass-flow-controllers/)

5 models

-     ![](https://analyt-mtc.com/illustrations/358-series-mc-mass-flow-controllers.webp)
    
    ### [358 Series MC mass flow controllers](https://analyt-mtc.com/catalog/product/358-series-mc-mass-flow-controllers/)
    
    Multi-gas controller reaching setpoint for 98+ gases, 0.5 smL/min to 5000 sL/min, full fieldbus I/O.
    
    ±0.8% RD · to 5000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/358-series-mc-mass-flow-controllers/)
    
-     ![](https://analyt-mtc.com/media/MC-2SLPM-D_3D.png)
    
    ### [358 Series MCQ mass flow controllers](https://analyt-mtc.com/catalog/product/358-series-mcq-mass-flow-controllers/)
    
    High-pressure gas controller to 22.1 bar a for 98 gases, 10 smL/min to 12 000 sL/min, fieldbus I/O.
    
    22.1 bar a · to 12 000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/358-series-mcq-mass-flow-controllers/)
    
-     ![](https://analyt-mtc.com/media/MC-2SLPM-D_3D.png)
    
    ### [358 Series MCS mass flow controllers](https://analyt-mtc.com/catalog/product/358-series-mcs-mass-flow-controllers/)
    
    Corrosion-resistant gas controller, FFKM seals, 128 gases, 0.5 smL/min to 12 000 sL/min.
    
    FFKM · to 12 000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/358-series-mcs-mass-flow-controllers/)
    
-     ![](https://analyt-mtc.com/media/MC-2SLPM-D_3D.png)
    
    ### [358 Series MCW mass flow controllers](https://analyt-mtc.com/catalog/product/358-series-mcw-mass-flow-controllers/)
    
    Low-pressure-drop gas controller for 98 gases, Δp from 4.8 mbar, 0.5 smL/min to 1000 sL/min.
    
    Δp from 4.8 mbar · to 1000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/358-series-mcw-mass-flow-controllers/)
    
-     ![](https://analyt-mtc.com/illustrations/dpc-mass-flow-controller.webp)
    
    ### [DPC Mass flow controller](https://analyt-mtc.com/catalog/product/dpc-mass-flow-controller/)
    
    Digital gas controller with 200:1 turndown, batch totalizers and under-150 ms response.
    
    ±(0.5% RD + 0.2% FS) · 200:1
    
    Aalborg
    
    [Details →](https://analyt-mtc.com/catalog/product/dpc-mass-flow-controller/)
    

## [Liquid Flow Controllers](https://analyt-mtc.com/catalog/liquid-flow-controllers/)

1 model

-     ![](https://analyt-mtc.com/illustrations/358-series-lc-liquid-flow-controllers.webp)
    
    ### [358 Series LC Liquid flow controllers](https://analyt-mtc.com/catalog/product/358-series-lc-liquid-flow-controllers/)
    
    Laminar liquid controller holding a volumetric setpoint, 0.5 mL/min to 10 L/min, with full I/O.
    
    ±2% FS · to 10 L/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/358-series-lc-liquid-flow-controllers/)
    

## [Rotameters With Needle Valve](https://analyt-mtc.com/catalog/rotameters-with-needle-valve/)

11 models

-     ![](https://analyt-mtc.com/illustrations/model-p-flow-meters.webp)
    
    ### [Model P flow meters](https://analyt-mtc.com/catalog/product/model-p-flow-meters/)
    
    Low-flow precision rotameter with direct-reading or mm scales and optional control valve.
    
    ±2% FS · 65/150 mm
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-p-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-t-flow-meters.webp)
    
    ### [Model T flow meters](https://analyt-mtc.com/catalog/product/model-t-flow-meters/)
    
    PTFE and glass wetted parts for corrosive gases and liquids; single tube with optional needle valve.
    
    ±2% FS · 65 °C · 6.7 bar
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-t-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-tx-flow-meters.webp)
    
    ### [Model Tx flow meters](https://analyt-mtc.com/catalog/product/model-tx-flow-meters/)
    
    Multiple-tube PTFE and glass meter for corrosive streams in individual channels or manifolded mixing.
    
    ±2% FS · 65 °C · 6.7 bar
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-tx-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-s-flow-meters.webp)
    
    ### [Model S flow meters](https://analyt-mtc.com/catalog/product/model-s-flow-meters/)
    
    Single-tube meter built for fast flow-tube changes and cleaning, with the same tubes as the P meter.
    
    ±2% FS · 13.8 bar · 120 °C
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-s-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-g-gas-proportioner-meters.webp)
    
    ### [Model G gas proportioner meters](https://analyt-mtc.com/catalog/product/model-g-gas-proportioner-meters/)
    
    Blends two or three gases in variable concentrations at the point of use; 150 mm tubes, mm scale.
    
    ±2% FS · 150 mm
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-g-gas-proportioner-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-v-medium-range-flow-meters.webp)
    
    ### [Model V medium range flow meters](https://analyt-mtc.com/catalog/product/model-v-medium-range-flow-meters/)
    
    Rugged brass or 316 stainless meter for medium air and water flows, with dual rotatable scales.
    
    ±5% FS · to 900 L/min air
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-v-medium-range-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-xv-multi-gas-medium-range-flow-meters.webp)
    
    ### [Model xV multi-gas mid-range flow meters](https://analyt-mtc.com/catalog/product/model-xv-multi-gas-medium-range-flow-meters/)
    
    Medium-range brass or stainless meter with direct-reading scales for argon, CO₂, helium, N₂ and O₂.
    
    ±5% FS · 5 gases
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-xv-multi-gas-medium-range-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-v-ptfe-medium-range-flow-meters.webp)
    
    ### [Model V PTFE medium range flow meters](https://analyt-mtc.com/catalog/product/model-v-ptfe-medium-range-flow-meters/)
    
    PTFE-wetted medium-range meter for corrosive air or water, 100–625 L/min air, dual rotatable scales.
    
    ±5% FS · to 625 L/min air
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-v-ptfe-medium-range-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-l-ptfe-pfa-flow-meters.webp)
    
    ### [Model L PTFE-PFA flow meters](https://analyt-mtc.com/catalog/product/model-l-ptfe-pfa-flow-meters/)
    
    All-PTFE, PFA and PCTFE meter for corrosive or ultra-pure liquids, 75 mL/min to 45 L/min.
    
    ±5% FS · to 45 L/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-l-ptfe-pfa-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/model-f-ptfe-flow-meters.webp)
    
    ### [Model F PTFE flow meters](https://analyt-mtc.com/catalog/product/model-f-ptfe-flow-meters/)
    
    In-line all-PTFE meter for high-purity or corrosive liquids from 125 mL/min to 45 L/min.
    
    ±5% FS · to 45 L/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/model-f-ptfe-flow-meters/)
    
-     ![](https://analyt-mtc.com/illustrations/rotameter-kit.webp)
    
    ### [Rotameter Kit](https://analyt-mtc.com/catalog/product/rotameter-kit/)
    
    Bench kit with interchangeable 150 mm flow tubes and floats in aluminium, stainless or PTFE cases.
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/rotameter-kit/)
    

## [Thermal Mass Flow Controllers](https://analyt-mtc.com/catalog/thermal-mass-flow-controllers/)

2 models

-     ![](https://analyt-mtc.com/illustrations/gfc.webp)
    
    ### [GFC](https://analyt-mtc.com/catalog/product/gfc/)
    
    Thermal gas controller with integrated solenoid valve and tiltable LCD; aluminium or stainless.
    
    ±1% FS · to 1000 sL/min
    
    ANALYT-MTC
    
    [Details →](https://analyt-mtc.com/catalog/product/gfc/)
    
-     ![](https://analyt-mtc.com/illustrations/dfc.webp)
    
    ### [DFC Mass Flow Controller](https://analyt-mtc.com/catalog/product/dfc/)
    
    Digital thermal gas controller with RS-232/485, totalizer and flow and pressure alarms.
    
    ±1% FS · to 100 sL/min
    
    Aalborg
    
    [Details →](https://analyt-mtc.com/catalog/product/dfc/)
    

## Manual or automatic flow control: which do I need?

Manual control means a [rotameter with needle valve](https://analyt-mtc.com/catalog/rotameters-with-needle-valve/): the same glass tube reads the flow and sets it by hand, with no power or electronics, for gases and liquids at ±2% FS standard. Automatic control means a mass flow controller, which drives a valve to a setpoint and takes analog, serial or fieldbus control. Choose manual when a hand-set value is enough; choose a controller when the setpoint has to be held by the instrument.

## Which type of mass flow controller suits my fluid?

For gases, there are two families. [Thermal mass flow controllers](https://analyt-mtc.com/catalog/thermal-mass-flow-controllers/) use a heat-transfer sensor with a built-in valve, from 10 smL/min to 1000 sL/min N2. [Laminar mass flow controllers](https://analyt-mtc.com/catalog/laminar-mass-flow-controllers/) work on differential pressure, reach setpoints for 98+ gases and report mass flow, volumetric flow, pressure and temperature, from 0.5 smL/min to 5000 sL/min.

For liquids, [liquid flow controllers](https://analyt-mtc.com/catalog/liquid-flow-controllers/) are laminar controllers that hold a volumetric setpoint from 0.5 mL/min to 10 L/min, with stainless steel wetted parts.

## How do I compare flow regulators for gas and liquid?

Compare the fluid first, then the range, then how the setpoint is set. A rotameter with needle valve covers gases and liquids with hand adjustment; the controllers above add automatic setpoint control, with gas or liquid as the deciding factor. Open the category that matches your fluid to compare accuracy, range and signals.

## Questions about these products?

Our application engineers aim to reply within 3 business hours.

[Ask an engineer](https://analyt-mtc.com/contact/?ask=1)
